Mazda RX8 1.3 2010 (petrol) - Wishbones and Suspension Arms

Wishbone and Suspension arms represent the not so obvious but most common wearing part on any vehicle. Sometimes it’s a wiser choice to replace a complete arm as the problem bush may be too difficult to remove and replace, and often require a hydraulic press. At Motortparts.ie we carry an extensive range of wishbones along with front and rear suspension arms and joints.

Suspension parts, rubber mounts such as bushings rank among the most vulnerable automotive components on your [make RX8. They’re designed to absorb the high loads occurring during acceleration, braking, cornering and going over road bumps and potholes to stabilise the control arm and therefore are subject to critical levels of strain.

A faulty rubber mount will normally result in a knock-on-effect and will transfer the impact along to other components on the chassis, therefore an inspection of the undercarriage would be wise at each service interval.

We supply high quality suspension components from manufacturers such as SWAG, Quinton Hazel, Meyle and others.

Category image for Wishbones and Suspension Arms

Sort By

Product Results

First Line Stabiliser Link (Front Left Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

Product code: U2237725 STABILISER LINK-MAZDA MX-5 05- supplier image

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

This First Line Stabiliser Link fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RRP: €24.94

€21.21

View Product

First Line Stabiliser Link (Front Right Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

Product code: U2237726 STABILISER LINK-MAZDA MX-5 05- supplier image

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

This First Line Stabiliser Link fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RRP: €24.94

€21.21

View Product

First Line Stabiliser Link (Rear Left Hand+Right Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

Product code: U2237727 REAR STABILISER-MAZDA MX-5 05- supplier image

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

This First Line Stabiliser Link fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RRP: €25.46

€21.65

View Product

Delphi Tie Rod End (Front Left Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Product code: U1105340 DELPHI: SPECIAL ORDER - Tie Rod End Mazda RX8 supplier image

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

This Delphi Tie Rod End fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Tie Rod End
Engine Code	N3H113B
BHP	228
Fitment	180
Model Detail	40
Part Note	78
	M14x1.5
	13

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Tie Rod End
Engine Code	N3H813B
BHP	228
Fitment	180
Model Detail	40
Part Note	78
	M14x1.5
	13

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Tie Rod End
Engine Code	13B
BHP	228
Fitment	180
Model Detail	40
Part Note	78
	M14x1.5
	13

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Tie Rod End
Engine Code	FE13B
BHP	228
Fitment	180
Model Detail	40
Part Note	78
	M14x1.5
	13

RRP: €43.03

€35.28

View Product

Delphi Tie Rod End (Front Right Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Product code: U1105341 DELPHI: SPECIAL ORDER - Tie Rod End Mazda RX8 supplier image

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

This Delphi Tie Rod End fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Tie Rod End
Engine Code	FE13B
BHP	228
Fitment	180
Model Detail	40
Part Note	78
	M14x1.5
	13

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Tie Rod End
Engine Code	13B
BHP	228
Fitment	180
Model Detail	40
Part Note	78
	M14x1.5
	13

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Tie Rod End
Engine Code	N3H813B
BHP	228
Fitment	180
Model Detail	40
Part Note	78
	M14x1.5
	13

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Tie Rod End
Engine Code	N3H113B
BHP	228
Fitment	180
Model Detail	40
Part Note	78
	M14x1.5
	13

RRP: €43.03

€35.28

View Product

Delphi Tie Rod (Front Left Hand+Right Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Product code: U1105366 DELPHI: SPECIAL ORDER - Inner Tie Rod Mazda RX8 supplier image

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

This Delphi Tie Rod fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Tie Rod Axle Joint
Engine Code	N3H113B
BHP	228
Fitment	250
Model Detail	37
Part Note	37
	M14x1.5

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Tie Rod Axle Joint
Engine Code	N3H813B
BHP	228
Fitment	250
Model Detail	37
Part Note	37
	M14x1.5

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Tie Rod Axle Joint
Engine Code	13B
BHP	228
Fitment	250
Model Detail	37
Part Note	37
	M14x1.5

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Tie Rod Axle Joint
Engine Code	FE13B
BHP	228
Fitment	250
Model Detail	37
Part Note	37
	M14x1.5

RRP: €31.32

€26.62

View Product

Delphi Stabiliser Link (Rear)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Product code: U1106639 DELPHI: SPECIAL ORDER - Stabiliser link Bar Mazda MX5 supplier image

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

This Delphi Stabiliser Link fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Stabiliser Rod/Strut
Engine Code	N3H813B
BHP	228
OE No	Coupling Rod
Fitment	85
Model Detail	32
Part Note	72
	M10x1.25
	M10x1.25

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Stabiliser Rod/Strut
Engine Code	N3H113B
BHP	228
OE No	Coupling Rod
Fitment	85
Model Detail	32
Part Note	72
	M10x1.25
	M10x1.25

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Stabiliser Rod/Strut
Engine Code	FE13B
BHP	228
OE No	Coupling Rod
Fitment	85
Model Detail	32
Part Note	72
	M10x1.25
	M10x1.25

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Stabiliser Rod/Strut
Engine Code	13B
BHP	228
OE No	Coupling Rod
Fitment	85
Model Detail	32
Part Note	72
	M10x1.25
	M10x1.25

RRP: €26.81

€22.79

View Product

Delphi Stabiliser Link (Front Left Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Product code: U1106684 DELPHI: SPECIAL ORDER - Stabiliser link Bar Mazda MX5 supplier image

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

This Delphi Stabiliser Link fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Stabiliser Rod/Strut
Engine Code	13B
BHP	228
OE No	Coupling Rod
Fitment	104
Model Detail	56
Part Note	56
	M10x1.25
	M10x1.25

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Stabiliser Rod/Strut
Engine Code	FE13B
BHP	228
OE No	Coupling Rod
Fitment	104
Model Detail	56
Part Note	56
	M10x1.25
	M10x1.25

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Stabiliser Rod/Strut
Engine Code	N3H113B
BHP	228
OE No	Coupling Rod
Fitment	104
Model Detail	56
Part Note	56
	M10x1.25
	M10x1.25

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Stabiliser Rod/Strut
Engine Code	N3H813B
BHP	228
OE No	Coupling Rod
Fitment	104
Model Detail	56
Part Note	56
	M10x1.25
	M10x1.25

RRP: €19.51

€16.58

View Product

Delphi Stabiliser Link (Front Right Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Product code: U1106685 DELPHI: SPECIAL ORDER - Stabiliser link Bar Mazda MX5 supplier image

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

This Delphi Stabiliser Link fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Stabiliser Rod/Strut
Engine Code	N3H813B
BHP	228
OE No	Coupling Rod
Fitment	104
Model Detail	56
Part Note	56
	M10x1.25
	M10x1.25

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Stabiliser Rod/Strut
Engine Code	N3H113B
BHP	228
OE No	Coupling Rod
Fitment	104
Model Detail	56
Part Note	56
	M10x1.25
	M10x1.25

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Stabiliser Rod/Strut
Engine Code	FE13B
BHP	228
OE No	Coupling Rod
Fitment	104
Model Detail	56
Part Note	56
	M10x1.25
	M10x1.25

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Description	Stabiliser Rod/Strut
Engine Code	13B
BHP	228
OE No	Coupling Rod
Fitment	104
Model Detail	56
Part Note	56
	M10x1.25
	M10x1.25

RRP: €19.51

€16.58

View Product

Meyle Stabiliser Link (Front Right Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

Product code: U1812577 MEYLE STABILISER LINK supplier image

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

This Meyle Stabiliser Link fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

Description	Stabiliser Link
Engine Code	13B
BHP	228
Air Con Note	Paired with: 35-16 060 0001
Material Type	replacement in pairs recommended
No of Teeth	MEYLE-ORIGINAL: True to OE., Rod/Strut: Coupling Rod
Payload	Required: 1
Shock Type	L: 105
Thread Type/Size	Thread Size 1: M10x1.25, Thread Size 2: M10x1.25
Trade No	MSL0384

RRP: €22.44

€18.15

View Product

Blue Print Stabiliser Link (Front Right Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Product code: U2208184 SUSPENSION LINK MAZDA 323 94-98 MAZDA 323 96-98 MA supplier image

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

This Blue Print Stabiliser Link fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	13BMSP
Model Code	189
From VIN No	Fitting Position:Front axle right
Note 3	Length[mm]:105

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	FE13B
Model Code	189
From VIN No	Fitting Position:Front axle right
Note 3	Length[mm]:105

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	N3J113B
Model Code	189
From VIN No	Fitting Position:Front axle right
Note 3	Length[mm]:105

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	13B
Model Code	189
From VIN No	Fitting Position:Front axle right
Note 3	Length[mm]:105

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	N3H313B
Model Code	189
From VIN No	Fitting Position:Front axle right
Note 3	Length[mm]:105

RRP: €20.02

€18.02

View Product

Blue Print Stabiliser Link (Front Left Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Product code: U2208185 SUSPENSION LINK MAZDA 323 96-98 MAZDA MX-5 98-05 K supplier image

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

This Blue Print Stabiliser Link fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	13B
Model Code	189
From VIN No	Fitting Position:Front Axle Left
Note 3	Length[mm]:105

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	13BMSP
Model Code	189
From VIN No	Fitting Position:Front Axle Left
Note 3	Length[mm]:105

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	N3J113B
Model Code	189
From VIN No	Fitting Position:Front Axle Left
Note 3	Length[mm]:105

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	FE13B
Model Code	189
From VIN No	Fitting Position:Front Axle Left
Note 3	Length[mm]:105

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	N3H313B
Model Code	189
From VIN No	Fitting Position:Front Axle Left
Note 3	Length[mm]:105

RRP: €20.02

€18.02

View Product

Blue Print Stabiliser Link (Rear Left Hand+Right Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Product code: U2217659 Stabiliser Link Mazda supplier image

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

This Blue Print Stabiliser Link fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12
RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-06/12

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	N3H313B
Model Code	189
Note 3	Length[mm]:85
Note 4	Colour:black;Material:steel
Note 6	Rear Axle Left; Rear Axle Right

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	13BMSP
Model Code	189
Note 3	Length[mm]:85
Note 4	Colour:black;Material:steel
Note 6	Rear Axle Left; Rear Axle Right

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	FE13B
Model Code	189
Note 3	Length[mm]:85
Note 4	Colour:black;Material:steel
Note 6	Rear Axle Left; Rear Axle Right

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	13B
Model Code	189
Note 3	Length[mm]:85
Note 4	Colour:black;Material:steel
Note 6	Rear Axle Left; Rear Axle Right

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 06/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	N3J113B
Model Code	189
Note 3	Length[mm]:85
Note 4	Colour:black;Material:steel
Note 6	Rear Axle Left; Rear Axle Right

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	13B
Model Code	228
Note 3	Length[mm]:85
Note 4	Colour:black;Material:steel
Note 6	Rear Axle Left; Rear Axle Right

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	FE13B
Model Code	228
Note 3	Length[mm]:85
Note 4	Colour:black;Material:steel
Note 6	Rear Axle Left; Rear Axle Right

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-06/12

Description	Stabiliser Link with lock nuts
Engine Code	N3H113B
Model Code	228
Note 3	Length[mm]:85
Note 4	Colour:black;Material:steel
Note 6	Rear Axle Left; Rear Axle Right

RRP: €21.55

€19.40

View Product

Auto Electrical

BATTERIES

Body Repair

CAR ACCESSORIES

Car Bulbs

CAR CARE

EMERGENCY

MIRRORS

POPULAR BRANDS

PROMOTIONS

ROOF RACKS & CARRIERS

TECHNICAL

TRAILER ACCESSORIES

WHEEL PRODUCTS

WORKSHOP

Body & Trim

Brake Friction

Cables

Clutch Friction

Cooling & Heating

Electrical

Engine Parts

Exhausts

Filters & Ignition

Fitting Tools

Flexible Mountings

Fuel & Engine Management

Hydraulics

Lighting

Lubricants & Fluids

Publications

Service Parts

Steering & Suspension

Transmission

Wipers

Air Power Tools

Bodyshop Tools

Garage & Workshop

Hand Tools

Jack Lift & Towing

Janitorial & Environ

Lighting & Power

Vehicle Service Tool

Your Vehicle

Refine Products

Description

Brands

Position

Steering & Suspension > Wishbones and Suspension Arms

Product Results

First Line Stabiliser Link (Front Left Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

This First Line Stabiliser Link fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

First Line Stabiliser Link (Front Right Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

This First Line Stabiliser Link fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

First Line Stabiliser Link (Rear Left Hand+Right Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

This First Line Stabiliser Link fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 07/03-12/10

Delphi Tie Rod End (Front Left Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

This Delphi Tie Rod End fits the following vehicles

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10

Delphi Tie Rod End (Front Right Hand)

RX8 Renesis (2.6. 2616cc) SE17 (2003-2010) 10/03-12/10